The toilet is a sanitary product that we use more frequently, but with the passage of time, various parts are prone to damage, such as the toilet cover is broken. How to repair the broken toilet cover? Today we will introduce the relevant content below, let’s take a look at how to repair the broken toilet cover!
1. If the ordinary toilet seat has the problem of aging and relaxation, that is, it loses its self-fixing effect, we first need to fix the connecting parts of the toilet seat. In fact, use a screwdriver to tighten the screws between the toilet lids. However, if there are other damages to the toilet cover, the toilet cover needs to be replaced again. The size of the original toilet cover should be accurately measured, including length, width, screw hole distance, etc., before purchasing the same toilet cover. When replacing, it is necessary to remove the screw with a wrench first, so that the toilet cover can be disassembled, and then a new toilet cover can be installed.
2. Before installation, prepare the required hardware accessories and construction tools to facilitate installation and use. Put the required screws into the square tenons at the left and right ends of the toilet in turn, and pass the screws through the iron shaft of the toilet cover, but you need to pay attention to the adjustment of the position at any time to prevent the toilet cover from being tilted. Then use a wrench to tighten the screw at the corresponding position, but pay attention to the degree of difficulty, and then check whether the installation of the toilet seat is horizontal and vertical.
