1. Daily cleaning, sterilization and descaling: The seat ring can be covered with napkins, sprayed with lemonade, rinsed and dried after covering for a period of time, which can effectively eliminate bacteria. Finally, put a no-wash automatic toilet cleaner in the water tank to do the daily cleaning, sterilization and descaling work. To prevent germs, wear rubber gloves to clean the toilet.
2. Mild dirt: For toilets that are not too dirty, spread toilet paper one by one on the inner wall of the toilet, then spray detergent or leftover Coke, let it stand for an hour, then rinse it with water, and finally Scrub lightly with a brush. This method not only does not need to scrub hard, but also has excellent cleaning effect.
3. Vinegar descaling: Pour the mixture of vinegar and water into the toilet, and after soaking for half a day, the scale will be removed with a brush. After scrubbing the toilet, spray white vinegar on the inside of the toilet, keep it for a few hours, and then rinse it with water, which can have the effect of disinfection and deodorization.
4. Baking soda descaling: Sprinkle 1/2 cup of baking soda in the toilet, and then soak it in hot boiled water for half an hour to remove lighter dirt. Before the stubborn yellow rust spots grow in the toilet, you should often use baking soda to sweep it. Sprinkle the baking soda on the inside of the toilet and let it sit for 10 minutes, then clean it with a toilet brush. If stubborn stains have formed, it can be used together with vinegar solution, soaked fully and cleaned with a brush. The outer base of the toilet, which is easily overlooked, can also be cleaned in the same way and then dried with a cloth. To remove stubborn toilet stains, use a fine steel wool ball dipped in baking soda.